The RT501I-IOL is an industrial interface that functions with a variety of Binsfeld Temperature Transmitters. This interface allows Temperature Transmitters to be connected to common industrial field bus. These field buses include, but are not limited to PROFINET, EtherNet/IP, and Modbus TCP/IP. Use with commercially available off-the-shelf IO-Link Masters is required.
- Digital circuitry from sensor input to signal output
Digital Circuitry - Maintains calibration and is immune to electrical noise and drift.
Product Support - Backed by BEI's reputation for the strongest customer support in the industry including a two-year warranty.
Warranty Information - Binsfeld Engineering Inc. warrants this product to be free from defective materials and workmanship for a period of two years from the date of delivery to the original purchaser and that this product will conform to specifications and standards published by Binsfeld Engineering Inc. Upon evaluation by Binsfeld Engineering Inc., any product found to be defective will be replaced or repaired at the sole discretion of Binsfeld Engineering Inc. Our warranty is limited to the foregoing. Binsfeld Engineering Inc. disclaims any warranty of merchantability or fitness for intended purpose.
CURRENT OUTPUT (+/- CURRENT)
Current Loop Power Input: 12 VDC to 30 VDC, 25 mA maximum
Current Draw: 4 mA for 21,731 Hz input (0° C RTD temperature)
20 mA for 14,935 Hz input (300° C RTD temperature)
20.1 mA for fault condition (out of range or no signal)
Maximum Current Draw Error: ±0.167% of full scale (±0.5° C for 300° C range) for 14,935 Hz to 21,731 Hz input frequency, over specified power supply and operating temperature range
RIETER FREQUENCY OUTPUT (+/- FREQUENCY)
Output Signal: Open collector output: 30 V max, 120 mA max
Frequency Form: Rectangular pulses
Frequency Range: 14,935 Hz to 21,731 Hz
Measurement Resolution: 0.015°C
Operating Environment: Temperature: 0 - 85° C (non-condensing)
Input Signal: Pulsed infrared LED @ 935nm
A multi-channel temperature measurement system upgrade for CAN bus systems. This works with Profibus DP digital communication.
A Dual CanBus Digital Communication system and a drop-in replacement for the 6-channel Neumag Multichannel Godet.
This is a drop-in replacement for the 6-channel Neumag Multichannel Godet Controller used on Neumag S5 machines.