The RT406-2C is a multi-channel temperature measurement system designed to monitor and control temperature on heated godet roll shells. Digital circuitry in the rotating transmitter and the stationary receiver are immune to electrical noise and drift. Generous 5 mm clearance between the rotating and stationary parts eliminate rubbing or impacting - a common failure cause in other designs. Error detection modes protect heater from damage and expedite troubleshooting in the event of a sensor or other failure. The system features Dual CanBus Digital Communication and is a drop-in replacement for the 6-channel Neumag Multichannel Godet Controller used on Neumag S5 and NPT machines.
- Dual CANbus I/O emulates Neumag S5 and NPT
- Built-in PID loop control
- Generous 5 to 25 mm rotor-stator clearance
- Digital circuitry from sensor input to signal output
Accurate - Within ±0.5°C across entire sensing range.
Robust - Fully encapsulated electronics with generous clearance between rotor and stator.
Neumag Compatible - A true drop-in replacement that works with existing wiring and process control systems.
Versatile - Other I/O schemes available
Digital Circuitry - Maintains calibration and is immune to electrical noise and drift.
Intelligent - Protects heater if sensor or transmitter malfunctions.
Product Support - Backed by BEI's reputation for the strongest customer support in the industry including a two-year warranty.
Warranty Information - Binsfeld Engineering Inc. warrants this product to be free from defective materials and workmanship for a period of two years from the date of delivery to the original purchaser and that this product will conform to specifications and standards published by Binsfeld Engineering Inc. Upon evaluation by Binsfeld Engineering Inc., any product found to be defective will be replaced or repaired at the sole discretion of Binsfeld Engineering Inc. Our warranty is limited to the foregoing. Binsfeld Engineering Inc. disclaims any warranty of merchantability or fitness for intended purpose.
Number of Sensors: 6
Input Sensor Type: PT1000 RTD (1000Ω at 0 °C, α =.00385), standard
Sensor Range: 0-300°C
Speed: 10,000 RPM
I/O Connectors: CAN 1: 3-socket (Tyco Electronics PN: 6-1437719-6)
CAN 2: 5-pin (Tyco Electronics PN: 6-1437719-5)
I/O Signals: CAN bus 1: 125k baud for communication with operator interface
CAN bus 2: 100k baud for communication with heater power controller
Power Input: 17 - 30 VDC, 500mA (max)
Accuracy: ±0.5°C (maximum over ambient operating range for 0-300°C RTD range)
Operating Temperature: 0 - 85°C
Rotor-Stator Spacing: Generous 5 to 25 mm rotor-stator clearance