The RT406-1C is a multi-channel temperature measurement system designed to monitor and control temperature on heated godet roll shells. Digital circuitry in the rotating transmitter and the stationary receiver are immune to electrical noise and drift. Generous 5 mm clearance between the rotating and stationary parts eliminate rubbing or impacting - a common failure cause in other designs. Error detection modes protect heater from damage and expedite troubleshooting in the event of a sensor or other failure. The system features Digital Communication via a single CAN bus and is a drop-in replacement for the 6-channel Neumag Multichannel Godet Controller used on Neumag S5 machines.
- Single CANbus I/O emulates Neumag S5
- Generous 5 mm rotor-stator clearance
- Digital circuitry from sensor input to signal output
Accurate - Within ±0.5°C across entire sensing range.
Robust - Fully encapsulated electronics with generous clearance between rotor and stator.
Neumag Compatible - A true drop-in replacement that works with existing wiring and process control systems.
Versatile - Other I/O schemes available
Digital Circuitry - Maintains calibration and is immune to electrical noise and drift.
Intelligent - Protects heater if sensor or transmitter malfunctions.
Product Support - Backed by BEI's reputation for the strongest customer support in the industry including a two-year warranty.
Number of Sensors: 6
Sensor connection: M3 set screw terminals with 2.38mm hole for ferrule access
Input Sensor Type: PT1000 RTD (1000Ω at 0 °C, α =.00385), standard
Sensor Range: 0-300°C
Speed: 10,000 RPM
I/O Connectors: CAN bus: 5-pin (Conec PN: 43-01013)
I/O signals: CAN bus: 500k baud for communication with heater power controller
Power Input: 17 - 30 VDC, 500mA (max)
Accuracy: ±0.5°C (maximum over ambient operating range for 0-300°C RTD range)
Operating Temperature: 0 - 85°C
Rotor-Stator Spacing: Generous 5 to 25 mm rotor-stator clearance