The RT376 Series Transmitter is a six-channel wireless temperature measurement system designed to monitor temperature on heated godet roll shells. It can be used to replace a Dienes AIO (All-in-One) transmitter. The system features a linear 4‑20 mA output from the controller interface for use with standard process controllers. Error detection modes protect the heater from damage and expedite troubleshooting in the event of a sensor or other failure. Digital circuitry from sensor input to signal output and generous clearance between the rotating and stationary components make the RT376 a robust and reliable element in the temperature feedback loop.
Accurate - Within ± 0.30% across entire sensing range.
Robust - Fully encapsulated rotating electronics with generous clearance between rotor and stator.
DIN-Rail Mount - Controller Interface installs easily in instrumentation cabinet.
Digital Circuitry - Digital rotor and stationary circuitry immune to noise and drift.
Intelligent - Protects heater if sensor, transmitter or cable malfunctions.
High Speed - Designed to operate up to 10,000 RPM.
Product Support - Backed by BEI's reputation for the strongest customer support in the industry and a full two-year warranty.
ROTOR
Number of sensors: 6
Sensor connection: M3-0.5 screw terminals
Input sensor type: PT100 RTD (100 ohm at 0°C, alpha = .00385)
Sensor range: 0 – 300°C
Speed: 10,000 RPM
STATOR
Connector: M3-0.5 screw terminals
Power input: (+V): 11 – 15 VDC
CONTROLLER
Output connection: Quick connect screw terminal block, 8-conductor Interface: Output signal: 4-20mA
Power input: 20-36 VDC or 15-25 VAC, 2A max, 0.5A nominal
GENERAL
Output connection: Quick connect screw terminal block, 8-conductor
Accuracy: ±0.15% span over 25 – 100°C ambient temperature range ±0.30% span over operating temperature range
Operating temperature: 0 – 100°C
Humidity: 0 – 90% RH, non-condensing