The RT360 Series Transmitter is a versatile multi-channel temperature measurement system designed to operate with a variety of machine configurations and control systems. The RT360 offers a selection of output signals including frequency (for Dienes process controllers); voltage; 4-20 mA current (for use with standard process control systems), and digital data stream. Generous 5 mm clearance between the rotating and stationary parts eliminate rubbing or impacting - a common failure cause in other designs. Digital circuitry in the rotating transmitter and the stationary receiver are immune to electrical noise and drift. Error detection modes protect heater from damage and expedite troubleshooting in the event of a sensor or other failure. Multiple mechanical configurations are available to fit most machines.
- Fits Rieter and SwissTex rolls that include Dienes transmitters
- Frequency, voltage, 4-20mA, and digital data signals available
- Multi-channel design - up to seven sensor inputs
- Multiple mechanical configurations available
Accurate - Within ± 0.1% (0.3°C) across entire sensing range.
Robust - Fully encapsulated electronics with generous clearance between rotor and stator.
Rieter-Dienes Compatible - A true drop-in replacement that fits existing shaft, works with existing wiring and process control systems.
Versatile - Selection of output signals including frequency, 4-20 mA current, voltage or digital data stream.
Flexible - Multiple mechanical configurations available.
Digital Circuitry - Maintains calibration and is immune to electrical noise and drift.
Intelligent - Protects heater if sensor or transmitter malfunctions.
Product Support - Backed by BEI's reputation for the strongest customer support in the industry including a two-year warranty.
Number of sensors: 1 - 3
Sensor connection: Connector, Fischer PN: D 102 A021
Input sensor type: PT100 RTD (100 ohm at 0° C, alpha = .00385)
Sensor range: 0-300° C
Output connection: Connector, Fischer PN: DB-104 2040-80
Output signals: Frequency signal as current pulses on the power supply
(Dienes curve: 362.48 - 749.86 Hz)
Power Input: 11 - 18 VDC @ 30 mA nominal, 50 mA output pulse
Accuracy: ±0.10% FS over 25-50° C ambient temperature range for 50-250° C RTD readings
±0.17% FS over 25-85° C ambient temperature range for 0-300° C RTD readings
±0.20% FS over 25-85° C ambient temperature range for 0-300° C RTD readings
±0.33% FS over operating temperature range for 0-300° C RTD readings
Max Temp Coefficient: ±50ppm/° C over operating temperature range for 0-300° C RTD readings
Operating Temperature: 0-100° C