Directions:

Choose a status tab and then click a specific condition to see the error code and a corrective action.

Power Status
Data Status
RTD Status
Stationary and rotary power in spec
Rotary power out of spec
Stationary power out of spec
System not powered
Insufficient rotary power or data not received
(Rotor Reset Mode)
Digital Transmission is error-free
Data not received
No errors detected
Rotary side error:
RTD Channel 1 out of range (including open or shorted)
Open circuit in 4-20mA loop on Channel 1
Corrective Action:
No action required.
Check rotor/stator spacing coax connections.
Check power source
Check power source, power connections.
Check rotor/stator spacing, coax connections.
Corrective Action:
No action required.
Check rotor/stator spacing, coax connections.
Corrective Action:
No action required.
Check RTD, connections
Check connections and continuity of current loop