BINSFELD ENGINEERING INC.

Specifications

 

TempTrak® RT310 Specifications

The RT310 series utilizes a digital transmitter circuit and digital controller interface circuit. Its inductive power and data transfer scheme is completely noncontact. Components are completely interchangeable and will handshake and adjust power levels as required. Different models are available to accommodate from one to four RTD signals.

NUMBER OF SENSORS:

Models available for 1-4 sensors

SENSOR INPUT:

PT100 RTD (100 at 0°C, a =.00385, two wire) standard (other configurations available including nonstandard RTDs)

SENSOR RANGE:

0° to 300°C standard (other configurations available)

SENSOR CONNECTION:

M3-0.5 screw terminals with socket-head cap screws
(designed for #4 ring terminals on customer sensor leads)

OUTPUT CONNECTION:

Quick connect screw terminal block

OUTPUT SIGNAL:

Discrete 4-20 mA current source (each channel)

ACCURACY:

±0.3% span over operating range

AMBIENT TEMPERATURE:

Rotating Unit: 0°C – 100°C
Stationary Housing: 0°C – 100°C
Controller Interface: 0°C – 85°C
Humidity: 0-90% RH, non-condensing

POWER INPUT:

22-35 VDC or 17-27 VAC; 2A max, 0.5A nominal

ROTOR SPEED:

5,000 RPM maximum

 

Specifications subject to change without prior notification.