BINSFELD ENGINEERING INC.

TorqueTrak Price List

 

Prices Effective April 1, 2017

TorqueTrak 10K Telemetry System

TorqueTrak 10K telemetry system includes:

  • TX10K-S Transmitter with antenna / BH10K Battery Holder / 5-ft. length 2-conductor battery cable / 10-ft. length 4-conductor strain gage ribbon cable / BS900 Bridge Simulator / 3/32” hex wrench / screwdriver / 9V battery connector / 2 Screws for BH10K Battery Holder: cap, hex sckt hd, #4-40 x ¼.
  • RX10K Receiver with Magnetic Mount receiver antenna & cable / wall plug transformer, 110VAC(220VAC)-12VDC / 5‑ft. length DB9 (RS-232) output cable.
  • RM10K Remote Control with 9V battery.
  • Accessories: Sturdy instrument case / 9V battery / Butyl Rubber patch / Fiberglass reinforced strapping tape / Teflon film / User’s Guide / Certificate of Calibration.
TorqueTrak 10K Torque Telemetry System $4,410.00
   

To lease this system on a monthly basis, please review and send a completed lease agreement to sales@binsfeld.com. If you have additional data acquisition needs, we recommend the joint lease agreement that includes the OpDAQ Field Test 2 systems.

TorqueTrak 10K-LP (Low Profile) Telemetry System

TorqueTrak 10K telemetry system includes:

  • TX10K-LP Transmitter with antenna / BH10K Battery Holder / 5-ft. length 2-conductor battery cable / 10-ft. length 4-conductor strain gage ribbon cable / BS900 Bridge Simulator / 3/32” hex wrench / screwdriver / 9V battery connector / 2 Screws for BH10K Battery Holder: cap, hex sckt hd, #4-40 x ¼.
  • RX10K Receiver with Magnetic Mount receiver antenna & cable / wall plug transformer, 110VAC(220VAC)-12VDC / 5‑ft. length DB9 (RS-232) output cable.
  • RM10K Remote Control with 9V battery.
  • Accessories: Sturdy instrument case / 9V battery / Butyl Rubber patch / Fiberglass reinforced strapping tape / Teflon film / User’s Guide / Certificate of Calibration.
TorqueTrak 10K-LP Torque Telemetry System $4,630.00
   

TX10K-S Transmitter, a component of the TorqueTrak 10K system.

TX10K-S Transmitter includes antenna / BH10K Battery Holder / 5-ft. length 2-conductor battery cable / 10-ft. length 4-conductor strain gage ribbon cable / BS900 Bridge Simulator / 3/32” hex wrench / screwdriver / 9V battery connector / 2 Screws for BH10K Battery Holder: cap, hex sckt hd, #4-40 x ¼.

 
TX10K-S Transmitter $2,300.00
 

 

TorqueTrak Revolution Instrument

Continuous Output Data: Torque, Power, RPM and Shaft Direction.

Customized/machined to fit a particular shaft diameter.

Inductive Power & Inductive Data Transfer.  (No batteries.  No wear surfaces.)

Price: $6,200.00 per system.  (Up to 6"/152 mm shaft diameter.)

Price premium will apply for shaft diameters larger than 6"/152 mm.

TorqueTrak Revolution System $6,200.00
   

 

TORQUETRAK TPM2 INSTRUMENT

Software for setup and configuration.

Digital RS422 output.

Splash resistant control box.

Selectable input ranges.

High RPM / centifugal g-force rating.

Price: $7,100.00 per system.  (Up to 6"/152 mm shaft diameter.)

Price premium will apply for shaft diameters larger than 6"/152 mm.

TorqueTrak TPM2 System $7,100.00
   

 

OpDAQ Systems - Data Acquisition

Data acquisition systems from OpDAQ Systems are designed specifically for processing, recording, displaying and analyzing the Torque, RPM and Power (Hp or kW) measurement data delivered by the TorqueTrak instruments from Binsfeld Engineering Inc.

For pricing, please refer to OpDAQ Systems, Price List, Apr-2016 .

 
   
   


9V Lithium Battery

9V Lithium battery (Rating: 1200 mAh).  Non-rechargeable.

ULTRALIFE Part # U9VL-J-P

One 9V Lithium battery is included with the TorqueTrak 10K system.

U9VL-J-P Technical Datasheet

 
9V Lithium Battery $19.00
   


Strain Gages

Strain Gage - Torque Pattern:

Part # CEA-06-250US-350: http://www.vishaypg.com/docs/11334/250us.pdf

Package of 5.  Full-Bridge configuration, 350 ohms. Use one gage per shaft.

 
Strain Gage #CEA-06-250US-350. Package of 5 $368.00
   


Strain Gage Application Kit

Strain Gage Application Kit.

Part # GAK-2-200: http://www.vishaypg.com/docs/11039/appkit.pdf

Sandpaper, Cleaner, Degreaser, Adhesive, etc. - various materials used for installation of the strain gage.  The Strain Gage Application Kit contains Hazardous Materials - the cleaners and other solvents used to prepare the surface for strain gage installation.  Because of this Hazardous Materials classification, a shipment to a location outside the USA may get delayed at the import border.  Premium Shipping & Handling Charges may be applied for shipments outside the USA.  Includes enough materials for perhaps 10 strain gage installations.  Order for this item is noncancelable and nonreturnable.

 
Strain Gage Application Kit (USA addresses only) $546.00
   


Protective Coating for Strain Gage

Protective Coating for strain gage.

Part # M-Coat JA-1: http://www.vishaypg.com/docs/11147/11147B147.pdf

1 mixing dispenser (70g ea.) Hazardous Materials. A two-part polysulfide liquid polymer compound for environmental protection of strain gage installations.  When fully cured, it forms a rubber-like covering that provides an effective barrier against water and many other fluids. The tough coating also protects the strain gage from mechanical damage.  Orders for this item are noncancelable and nonreturnable.

 
Part # M-Coat JA-1, 1 mixing dispenser (USA addresses only) $132.00
   

          For spare parts, replacement parts or repairs, please contact Binsfeld Engineering Inc.